Indoor self-service dog wash
- Ideal for indoor applications
- Special hair dryer for drying dog hair
- Six programs for thorough washing
- Bath equipped with anti-slip rubber
- Safety clip and door latch
- Easy and simple to use
Splash Dog features
The Splash Dog indoor dog wash is ideal for installation in shopping malls, pet stores and existing commercial premises.
- 1/2″ (inch) water supply connection
- Single-phase electricity connection, at least 5kW (16A fuse)
- Sewerage drain with a 50 mm diameter connecting pipe.
How a Splash Dog wash works
After paying in coins or banknotes or using a bank card, the preferred mode is selected by pressing a key. The customer only pays for the time actually used and may switch between modes at any time.
The Splash Dog self-service dog wash offers six washing modes and a stop key to stop/pause a running mode.
- Disinfection of the tub
- The tub is disinfected before the customer begins to wash their pet.
- Duration: 30 - 60 seconds.
- Dog hair shampoo
- Organic shampoo specifically designed for washing dog hair.
- Duration: around 2 minutes.
- Anti-flea and tick shampoo
- Natural vegetable oil-based shampoo to remove fleas and ticks.
- Duration: around 1 minute.
- Hair conditioner
- Conditioner for a soft and shiny coat that will be easy to brush.
- Duration: around 1 minute.
- Rinsing with warm water
- Rinsing with water heated to an optimal temperature of 38°C.
- Duration: around 3 minutes or as necessary.
- Hair drying
- Drying with a hair dryer specifically designed for a dog hair.
- Duration: around 5 minutes or as necessary.
Washing and cleaning products
The Splash Dog self-service dog wash only uses organic shampoo specifically designed for dogs. All such products are available in most pet stores.
Tub disinfectant: Asepsol Eco 3L
Washing shampoo: Gottlieb New Style Shampoo 5L
Anti-flea and tick shampoo: Panzi Plus Flea Repellent Shampoo 200 ml
Hair conditioner: Gottlieb New Style Creme Spelling 5L
The washing facility is easy and simple to clean:
Cleaning does not require much effort and is very easy to do:
- 1. Lift the bottom of the tub to clean any hair remaining around the drain mesh.
- 2. Rinse the tub by pressing the rinse key.
- 3. After rinsing, return the bottom to its original position.
- 4. The device is ready to be used.
